ARM IoT SBC
Optimized for industrial control and monitoring
Extensive wireless and wired connectivity
Ideal for cost-sensitive systems
- NXP i.MX8M-Plus CPU, quad-core Cortex-A53
- Up to 8GB RAM and 128GB eMMC
- LTE/4G modem, WiFi 802.11ax, Bluetooth 5.3
- 2x LAN, USB3.0, 2x USB2.0 and 2x CAN bus
- Up-to 3x RS485 | RS232 and digital I/O
- Modbus RTU, Modbus TCP and MQTT
- Custom I/O expansion boards
- Designed for reliability and 24/7 operation
- Industrial temperature range of -40C to 80C
- Secure boot, TPM and Hardware Watchdog
- Wide input voltage range of 8V to 36V and PoE client
Specification:
CPU Core | |
| CPU | NXP i.MX8M Plus QuadLite, quad-core ARM Cortex-A53, 1.8GHz |
| NXP i.MX8M Plus Quad, quad-core ARM Cortex-A53, 1.8GHz | |
| NPU | AI/ML Neural Processing Unit, up to 2.3 TOPS |
| Real-Time Co-processor | ARM Cortex-M7, 800Mhz |
Memory and Storage | |
| RAM | 1GB – 8GB, LPDDR4 |
| Storage | 16GB – 128GB eMMC flash, soldered on-board |
Display and Graphics | |
| Display Output | DVI-D, up to 1080p60 |
| GPU and Video | GC7000UL GPU 1080p60 HEVC/H.265, AVC/H.264 |
Network | |
| LAN | 2x 1000Mbps Ethernet ports, RJ45 connectors |
| WiFi and Bluetooth | 802.11ax WiFi and Bluetooth 5.3 BLE Implemented with Intel WiFi 6E AX210 module 2x 2.4GHz / 5GHz rubber duck antennas |
| Cellular | 4G/LTE CAT4 cellular module, Quectel EC25-E (EU bands) |
| 4G/LTE CAT4 cellular module, Quectel EC25-A (US bands) | |
| SIM card socket | |
| Cellular rubber duck antenna | |
| GNSS | GPS Implemented with Quectel EC25 module |
I/O | |
| USB | 2x USB2.0 ports, type-A connectors (back panel) |
| 1x USB3.0 port, type-A connector (front panel) | |
| RS485 / RS232 | Up-to 3x RS485 (half-duplex) | RS232 ports Isolated, terminal-block connector |
| CAN bus | 1x CAN bus port Isolated, terminal-block connector |
| Additional 1x CAN bus port Isolated, terminal-block connector | |
| Digital I/O | 4x digital outputs + 4x digital inputs Isolated, 24V compliant with EN 61131-2, terminal-block connector |
| Debug | 1x serial console via UART-to-USB bridge, micro-USB connector |
| Support for NXP SDP/UUU protocol, micro-USB connector | |
| Expansion Connector | Expansion connector for add-on boards LVDS, SDIO, USB, SPI, I2C, GPIOs |
System | |
| RTC | Real time clock operated from on-board coin-cell battery |
| Watchdog | Hardware watchdog |
| Security | Secure boot, implemented with i.MX8M Plus HAB module |
| TPM 2.0, Infineon SLB9670 * implemented with add-on board installed in expansion connector | |
| LEDs | 2x general purpose LEDs |
| PoE | Support for PoE (powered device) |
Contact: mindplex labs
E-mail: info@mindplexlabs.com
Add: 12 Woodlands Square, #15-68, Woods Square Tower 1, Singapore 737715
